Support plates and grids

VFF also supplies numerous column internals as well as a complete range of tower packings which are designed, engineered and produced specifically for each customer by VFF. The VFF team provides full consultation in this area and has the corresponding experience and most up-to-date equipment to be able to offer tailor-made ideal solutions.

The VFF product range includes an extensive assortment of support plates and grids with load-bearing capacities from several 100 kg/m² to several t/m², depending on material, wall thickness, type and substructure. We can offer suitable support plates or grids made from a wide range of materials, i.e. ceramic (ACIDUR® special stoneware), metal (steel, stainless steels, alloys and others) or synthetic materials (PE,PP, PVC, C-PVC, PVDF, PTFE and others) for almost any application.

 

Detailed information: Support plates and grids

 

Description Type min. ... max. D [max] A(f) [%] min. NA [mm] Comment
Grating

VFF Gittertrost

AU-02-M, P > 0.1 75 25 (10) Very inexpensive, one or multi-piece, operation above the loading point should generally be avoided
Multi beam support plate

VFF Profilauflageboden

AU-03-K, M, P < 1.2 35...85 25 (15) Trapezoidal profiles with slits and holes, separate liquid and gas flows.
Braun's support grid

VFF Braunscher Tragrost

AU-04-K > 0.25 > 50 50 (25) Standard parts: 500 mm x 300 mm; height: approx. 100 mm, load-bearing substructure necessary with min. 100 mm support width
VFF-Grid

VFF Grid

AU-05-K > 0.25 > 70 50 Standard parts: 500 mm x 300 mm; height: approx. 100 mm, load-bearing substructure necessary with min. 100 mm support width
VFF-Super-Grid

VFF Super Grid

AU-06-K > 0.25 > 70 50 (25*) Standard parts: 500 mm x 300 mm; height: ca. approx. 155 mm, load-bearing substructure required with min. 100 mm support width; reduced pressure drop; *) using an inlaid grid overlay
Venturi grid
AU-07-K > 0.25 > 20 (50) 50 (25) Standard parts: 500 mm x 300 mm; height: approx. 100 mm, load-bearing substructure necessary with min. 100 mm support width
Multi beam support plate
AU-10-K, M, P > 1.0 35 ... > 100 25 Single profile, separated liquid and gas feed, recommended for operation above the loading point
Collector- and support combination element
FSA-10-P > 2.0 > 50 25 Standard profile: approx. 2 x 250 mm width; rain penetration rate: approx. 10 litre / (m² x h)
Grid overlay: Cyl. ring with / without web; grid block

VFF Rostübergangsbeläge

        Click here for more information about ceramic rings, grid blocks etc.
Cross partition ring

K/ZSt-4 > 0.2 50 25...> 50 Nominal sizes (mm): Standard sizes (mm): 50 / 80 / 100 / 120 / 150 / 200; with one or two internal webs; load bearing substructure required
Hold down plate

VFF Rueckhalteplatte

RH-03-M, P > 0.1 75 25 (10) Grating, one-piece or multi-part
Custom designs
          Modified wall thickness, overall height, etc.

Subject to technical modifications. All details serve for preliminary information purposes only. Claims cannot be derived therefrom.

Contact Kolonneinbauten

Your VFF product specialist

Dr. Kurt Schwämmlein
Dipl.-Chem.

Telephone:
+49 (0)2623 895-20
Fax: +49 (0)2623 895-39
This email address is being protected from spambots. You need JavaScript enabled to view it.

 


Ms Katrin Annen, B. Eng.

Telephone:
+49 (0)2623 895-37
Fax: +49 (0)2623 895-39
E-mail: This email address is being protected from spambots. You need JavaScript enabled to view it.

 


 

Cookies make it easier for us to provide you with our services. With the usage of our services you permit us to use cookies.
More information Ok